Table of Contents
Advertisement
Changing printing origin
Changing printing origin with JOG keys
• For the setting procedure when the toggle print function is set to OFF, refer to P.3-2 "Changing origin".
Press
1
• The origin mode starts.
When
When
Press
2
Press the
3
Move the light pointer mark by pressing
4
• A red light pointer mark [●] is projected on the table or the media.
• Move the light pointer mark to the position to set a new origin.
Press the
5
determined.
• The origin is updated.
• The set value for the origin set with the JOG keys is cleared by cutting the power.
3-18
in LOCAL.
is pressed, proceed to step 4.
is pressed, proceed to step 2.
to select the area to set the origin.
key.
.
key when the printing origin is
• When [[F]/[R] SETUP] is set to "COMMON", the set value is registered to both FRONT/
REAR areas.
• When [[F]/[R] SETUP] is set to "INDIVIDUAL", the set value is registered only to the
selected area.
< F RON T > OR I G I N S E TUP
5 0 0 . 0
- - - -
AREA
: F RON T
AREA
: REAR
< REAR >
OR I G I N S E TUP
5 0 0 . 0
< REAR >
OR I G I N S E TUP
5 0 0 . 0
6 0 0 . 0
Origin
Origin
position
position
(back and
(right and
forth)
left)
Advertisement
Table of Contents
