Changing The Printing Origin - MIMAKI UJV55-320 Operation Manual

Changing the printing origin

The position of the printing origin can be changed.
1
In Local, press
• It enters into the origin setting mode.
Origin Setup
X
0.0
2
Press
to a desired position.
Origin
(Length)
• Select the carriage and media, moving the point
with [][][][]. (Position of the LED pointer
becomes the origin position.)
3
After determining the origin, press the
key.
• The printing origin is changed.
• When a roll media is set on the narrow roll holder,
change the origin, and then rewind the media by
hand and set the media without slack.
If the media is loose, the media feed amount of the
media varies, causing poor image quality.
2-22
.
Y
0.0
to set the origin
Origin
(Width)