Table of Contents
Advertisement
Caution in handling of ink bottles
• If you get ink in your eyes, immediately wash your eyes with a lot of clean running water for at least 15
minutes. In doing so, also wash the eyess to rinse ink away completely. Then, consult a doctor as
soon as possible.
• Use genuine ink bottles for this machine. This machine functions by recognizing the genuine ink
bottles. In case of troubles caused by modified ink bottles or the like, it shall be out of the warranty
even within the warranty period.
• Store the ink bottle in a place not more than 1 m off the ground. If you store it in a place higher than 1
m, should the ink bottle fall, the cap may come off, spilling the ink.
• If the ink bottle is moved from a cold place to a warm place, leave it in the room temperature for three
hours or more before using it.
• Make sure to store ink bottles in a cool and dark place.
• Store ink bottles and waste ink tank in a place that is out of the reach of children.
• Request an industrial waste processor for processing of empty ink bottles.
• Be sure to thoroughly consume the ink in the ink bottle, once it is opened, within three months. If an
extended period of time has passed away after opening the ink bottle, printing quality would be poor.
• Do not shake ink bottles violently. This may result in ink leakage from the ink bottles.
• Never refill the ink bottles with ink. This may result in troubles.
MIMAKI will not bear any responsibility for any damage caused by the use of the ink bottles refilled
with ink.
• Do not touch or stain the contacts of the IC chip. This may cause damages on printed circuit boards.
• The shape of an ink bottle installed in the machine might
collapse as shown in the figure on the right. This is
normal, and does not affect the use or operation of the
machine.
Setting ink bottles
1-17
1
3
4
5
6
Advertisement
Table of Contents
