Changing The Printing Origin - MIMAKI JV33-260BS Operation Manual

Changing the printing origin

The position of the printing origin can be changed.
Moving the LED pointer to the changing position and deciding the position.
• The origin position set above misaligns with the feeding direction of a media by a few centimeters. Turn
[FEED ORIGIN] "ON" in setup mode to fit the origin to the correct light position of LED pointer.
(
When the heavy-duty feeding / take-up device is not used
1
In the local mode,
press the
• It enters into the origin setting mode.
2
Set a light point of the LED pointer to the changing position by pressing the
• Select the carriage and media, moving the point with the
3
After determining the origin,
press the
• The printing origin is changed.
2-28
Downloaded From ManualsPrinter.com Manuals
P.3-4)
keys.
keys.
key.
keys.
OR I G I N S E TUP
0 . 0 - - - -
OR I G I N S E TUP
0 . 0 0 . 0
Origin Origin
(Length) (Width)
OR I G I N S E TUP
* * OR I G I N * *