Displaying Ip Unnumbered Interface Settings - Cisco Catalyst 4500 Series Configuration Manual

Chapter 16 Configuring IP Unnumbered Interface

Displaying IP Unnumbered Interface Settings

Use the show ip interface unnumbered command to display status of an unnumbered interface with
connected host polling for the switch.
To display status of an unnumbered interface, enter this command:
Command
Switch# show ip interface [type number]
unnumbered [detail]
The following example shows how to display the status of unnumbered interfaces with connected host
polling:
Switch# show ip interface loopback 0 unnumbered detail
Number of unnumbered interfaces with polling: 1
Number of IP addresses processed for polling: 2
10.1.1.7
10.1.1.8
Number of IP addresses in queue for polling: 2(high water mark: 3)
10.1.1.17
10.1.1.18
To display key statistic for the backlog of unnumbered interfaces with connected host polling for the
switch, perform this task:
Command
Switch# show ip arp poll [detail]
The following example shows how to display key statistic for the backlog of unnumbered interfaces with
connected host polling:
Switch# show ip arp poll
Number of IP addresses processed for polling: 439
Number of IP addresses in queue for polling: 3 (high water mark: 0, max: 1000)
Number of requests dropped:
Queue was full: 0
Request was throttled by incomplete ARP: 0
Duplicate request was found in queue: 0
To clear the key statistic for the backlog of unnumbered interfaces, use the clear ip arp poll statistic
command, as follows:
Switch# clear ip arp poll statistic
Switch# show ip arp poll
Number of IP addresses processed for polling: 0
Number of IP addresses in queue for polling: 0 (high water mark: 0, max: 1000)
Number of requests dropped:
Queue was full: 0
Request was throttled by incomplete ARP: 0
Duplicate request was found in queue: 0
OL-25340-01
Purpose
Displays the status of unnumbered interface with connected
host polling for the Catalyst 4500 series switch.
Purpose
Displays key statistic for the backlog of unnumbered
interfaces with connected host polling for the switch.
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
Displaying IP Unnumbered Interface Settings
16-7