Configuring A Switch To Receive Mac Address-Table Move Updates - Cisco Catalyst 4500 Series Configuration Manual

Release ios xe 3.3.0sg and ios 15.1(1)sg
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Monitoring Flex Links and the MAC Address-Table Move Update

Configuring a Switch to Receive MAC Address-Table Move Updates

To configure a switch to receive and process MAC address-table move update messages, perform this
task:
Command
Step 1
Switch# configure terminal
Step 2
Switch(conf)# mac address-table move update
receive
Step 3
Switch(conf)# end
Step 4
Switch# show mac address-table move update
Step 5
Switch# copy running-config startup config
To disable the MAC address-table move update feature on the access switch, enter the
no mac address-table move update receive configuration command. To display the MAC address-table
move update information, enter the show mac address-table move update command.
This example shows how to configure a switch to receive and process MAC address-table move update
messages:
Switch# configure terminal
Switch(conf)# mac address-table move update receive
Switch(conf)# end
Monitoring Flex Links and the MAC Address-Table Move
Update
Table 21-1
move update information.
Table 21-1
Flex Links and MAC Address-Table Move Update Monitoring Commands
Command
Switch# show interface [interface-id]
switchport backup
Switch# show mac address-table move
update
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
21-12
shows the commands for monitoring the Flex Links configuration and the MAC address-table
Purpose
Displays the Flex Link backup interface configured for an interface or all the
configured Flex Links and the state of each active and backup interface (up or
standby mode).
Displays the MAC address-table move update information on the switch.
Chapter 21
Configuring Flex Links and MAC Address-Table Move Update
Purpose
Enters global configuration mode.
Enables the switch to receive and process the MAC
address-table move updates.
Returns to privileged EXEC mode.
Verifies the configuration.
(Optional) Saves your entries in the switch startup
configuration file.
OL-25340-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents