Cisco Catalyst 4500 Series Configuration Manual page 109

Chapter 1 Product Overview
http://www.cisco.com/en/US/docs/ios-xml/ios/media_monitoring/configuration/xe-3sg/mm-mediatrace
.html
MLD Group Limits
http://www.cisco.com/en/US/docs/ios-xml/ios/ipv6/configuration/15-1sg/ip6-multicast.html
http://www.cisco.com/en/US/docs/ios-xml/ios/ipv6/configuration/xe-3sg/ip6-multicast.html
Media Services Proxy
http://www.cisco.com/en/US/docs/ios-xml/ios/msp/configuration/15-1sg/med-ser-prxy.html
http://www.cisco.com/en/US/docs/ios-xml/ios/msp/configuration/xe-3sg/med-ser-prxy-xe.html
MSDP MD5 password authentication
http://www.cisco.com/en/US/docs/ios-xml/ios/ipmulti_pim/configuration/15-1sg/imc_msdp.html
http://www.cisco.com/en/US/docs/ios-xml/ios/ipmulti_pim/configuration/xe-3sg/imc_msdp.html
Multicast Address Group Range Support
The Multicast Address Group Range Support feature enhances multicast access control by introducing
the capability to define a global range of multicast groups and channels to be permitted or denied using
the ip multicast group-range command. For more information, see the Cisco IOS IP Multicast
Command Reference at http://www.cisco.com/en/US/docs/ios-xml/ios/ipmulti/command/imc_i2.html.
Named Mode for EIGRP VNETs IPv4
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_eigrp/configuration/xe-3sg/ire-cfg-eigrp.html
Network Mobility Services Protocol (NMSP) Enhancements
• Custom Location Type
Users can customize the name and value of a switch location using the location custom-location
identifier command.
• Geo Location Type Support
Users can specify the geographical details of a switch location such as latitude, longitude, and
altitude of a switch using the location geo-location identifier command.
• Switch Location Configuration
Users can specify the switch location via 'host' identifier on the interface and enter specific location
data under port-location sub-mode using the following commands:
–
–
–
Switch location can contain civic address, custom identifier and GPS location where an individual
location type can be present or absent.
NTPv4 with support for IPv4 and IPv6
http://www.cisco.com/en/US/docs/ios-xml/ios/bsm/configuration/xe-3sg/ip6-ntpv4.html
OSPF Enhanced Traffic Statistics for OSPFv2 and OSPFv3
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_ospf/configuration/15-1sg/iro-traff-stats.html
OL-25340-01
New and Modified Software Features Supported in Cisco IOS 15.1(1)SG and Cisco IOS XE 3.3SG
location civic-location identifier host
location geo-location identifier host
location custom-id identifier host
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
1-45