Manipulating Bootflash On The Standby Supervisor Engine - Cisco Catalyst 4500 Series Configuration Manual

Manipulating Bootflash on the Standby Supervisor Engine

This example illustrates how to verify that the running configuration on the active supervisor engine has
successfully synchronized with the redundant supervisor engine:
Switch# config terminal
Switch(config)# redundancy
Switch(config-red)# main-cpu
Switch(config-r-mc)# auto-sync standard
4d01h: %C4K_REDUNDANCY-5-CONFIGSYNC: The bootvar has been successfully synchronized to the
standby supervisor
4d01h: %C4K_REDUNDANCY-5-CONFIGSYNC: The config-reg has been successfully synchronized to
the standby supervisor
4d01h: %C4K_REDUNDANCY-5-CONFIGSYNC: The startup-config has been successfully synchronized
to the standby supervisor
4d01h: %C4K_REDUNDANCY-5-CONFIGSYNC: The private-config has been successfully synchronized
to the standby supervisor
The example above shows that the boot variable, the config-register, and the startup configuration from
the active supervisor engine have successfully synchronized to the redundant supervisor engine.
Manipulating Bootflash on the Standby Supervisor Engine
Note
To manipulate the standby supervisor engine bootflash, perform one or more of the following tasks:
Command
Switch# dir slaveslot0:target_filename
or
Switch# dir slavebootflash:target_filename
Switch# delete slaveslot0:target_filename
or
Switch# delete slavebootflash:target_filename
Switch# squeeze slaveslot0:target_filename
or
Switch# squeeze slavebootflash:target_filename
Switch# format slaveslot0:target_filename
or
Switch# format slavebootflash:target_filename
Switch# copy source_device:source_filename
slaveslot0:target_filename
or
Switch# copy source_device:source_filename
slavebootflash:target_filename
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
10-14
Chapter 10 Configuring Supervisor Engine Redundancy Using RPR and SSO on Supervisor Engine 7-E and Supervisor
The console port on the standby supervisor engine is not available.
Purpose
Lists the contents of the slot0: device on the standby
supervisor engine.
Lists the contents of the bootflash: device on the standby
supervisor engine.
Deletes specific files from the slot0: device on the standby
supervisor engine.
Deletes specific files from the bootflash: device on the
standby supervisor engine.
Squeezes the slot0: device on the standby supervisor engine.
Squeezes the bootflash: device on the standby supervisor
engine.
Formats the slot0: device on the standby supervisor engine.
Formats the bootflash: device on the standby supervisor
engine.
Copies a file from the active supervisor engine to the slot0:
device on the standby supervisor engine.
Copies a file to the bootflash: device on a standby supervisor
engine.
Note Source could be the active supervisor engine or a
TFTP server.
OL-25340-01