Cisco Catalyst 4500 Series Configuration Manual page 623

Chapter 24 Configuring EtherChannel and Link State Tracking
Timers: H - Hello timer is running.
Local information:
Port
Fa5/4
Partner's information:
Port
Fa5/4
Age of the port in the current state: 00h:54m:52s
Switch#
This example shows how to verify the configuration of port channel interface 1 after the interfaces have
been configured:
Switch# show etherchannel 1 port-channel
Group: 1
------------
Port-channel: Po1
------------
Age of the Port-channel
Logical slot/port
GC
Port state
Ports in the Port-channel:
Index
-------------------
1
0
Time since last port bundled:
Switch#
This example shows how to display a one-line summary per channel group:
Switch# show etherchannel summary
Flags:
Number of channel-groups in use: 2
OL-25340-01
S - Switching timer is running.
Flags State Timers
SC U6/S7
Partner
Name
JAB031301
Channel-group listing:
----------------------
Port-channels in the group:
----------------------
= 01h:56m:20s
= 10/1
= 0x00010001
= Port-channel L3-Ag Ag-Inuse
Load Port
00 Fa5/6
00 Fa5/7
D - down P - bundled in
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use f - failed to allocate
M - not in use, minimum links not
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
Q - Quit timer is running.
I - Interface timer is running.
Hello Partner PAgP
Interval Count Priority
30s 1 128
Partner Partner
Device ID Port
0050.0f10.230c 2/45
Number of ports = 2
HotStandBy port = null
00h:23m:33s Fa5/6
port-channel
aggregator
met
Configuring EtherChannel
Learning Group
Method Ifindex
Any 55
Partner Group
Age Flags Cap.
1s SAC 2D
24-9