Supervisor Engine Iii G Overview; Supervisor Engine Iii G Front Panel Components - Cisco Catalyst 5000 Series Installation And Configuration Note

Supervisor engine iii g
Hide thumbs Also See for Catalyst 5000 Series:
Table of Contents

Advertisement

Supervisor Engine III G Overview

Supervisor Engine III G Overview
Supervisor Engine III G includes the following features:

Supervisor Engine III G Front Panel Components

The Supervisor Engine III G front panel is shown in Figure 1.
Figure 1
WS-X5550
SUPERVISOR ENGINE III G-SERIES
Status
LEDs
The LEDs on the supervisor engine front panel indicate the status of the system, which includes the
states of the supervisor engine, the power supplies, and the fan assembly. Table 1 describes the
LEDs.
Table 1
LED
SYSTEM
STATUS
2 Catalyst 5000 Series Supervisor Engine III G Installation and Configuration Note
Bridge address table for up to 16,000 active Media Access Control (MAC) addresses and
associated virtual local-area networks (VLANs) allocated dynamically between active ports
Switching engine that provides data path and control for all network interfaces including two
integrated Fast Ethernet interfaces that can support redundancy using the spanning-tree algorithm
or load sharing when used with VLANs
Gigabit Ethernet multimode fiber (MMF) or single-mode fiber (SMF) interfaces using
SC connectors
Management functions that include monitoring the interface and environmental status and
providing Simple Network Management Protocol (SNMP) management and the
console/Telnet interface
37.5-MHz MCF5102 Network Management Processor (NMP)
Switch fabric interface with a capability of over one million packets per second (pps)
Hardware support for up to 1024 VLANs
Gigabit Interface Converter (GBIC)-based uplink ports
Onboard NetFlow Feature Card II (NFFC II) chipset for core switching logic
Supervisor Engine III G
CONSOLE
Switch
Load display
LEDs
Console ports
Reset
button
LED Descriptions
State
Green
Red
CONSOLE
LINK
PORT MODE
RSFC CONSOLE
PORT 1
Uplink ports with
GBIC fiber-optic connections
Description
Indicates the status of the switch based on a series of self-tests and
diagnostic tests.
All the tests pass.
Any test fails.
LINK
PORT 2

Advertisement

Table of Contents
loading

Table of Contents