Save To And Recall From The Registers; Use The Calculator To Set The Source Value; Quick Guide To Applications - Fluke 753 User Manual

753/754
Users Manual

Save to and Recall from the Registers

When the Product is in calculator mode, the top half of the
display shows three register names and their contents:
•
MEASURE (the present measured value)
• SOURCE (the present sourced value)
• REGISTER (temporary storage for your use)
Push the Recall softkey and then the softkey for the
applicable register to insert the contents of any register into
a calculation.
Push Store to copy the number from the calculator display
(lower half) into REGISTER to temporarily save the number
for later use, or into SOURCE.
88
info@Fluke-Direct.ca

Use the Calculator to Set the Source Value

When you store to SOURCE, the Product shows a selection
of unit multipliers when necessary (for example, mV or V),
then starts sourcing that value. The Product will not keep
out-of-range values to SOURCE.

Quick Guide to Applications

The subsequent figures show test lead connections and
which Product functions to use for many different
applications.
Fluke-Direct
.ca
1.800.868.7495