753/754
Users Manual
9.
Push for MEASURE/SOURCE mode. The display
changes to the screen shown in Figure 28.
Figure 28. Process Instrument Calibration Screen
10. Push the As Found softkey, followed by the
Instrument selection ().
70
info@Fluke-Direct.ca
The display changes to the screen shown in Figure 29.
Figure 29. Process Instrument Calibration Screen 2
gks42s.bmp
11. Record values for 0% and 100% of 4.0 mA and
20.0 mA, in that sequence. Set Tolerance to 0.5% of
span.
Fluke-Direct
.ca
1.800.868.7495
gks44s.bmp