Fluke 753 User Manual page 39

To set the time and date displays:
1. Push s.
2. Push the Next Page softkey. See Figure 9.
Figure 9. Time and Date Display
3. Push  and  to move the cursor to the necessary
parameter, then push  or the Choices softkey to
choose a setting for that parameter.
For example, the display in Figure 10 is shown after
you select Date Format.
info@Fluke-Direct.ca
4. Push  or  to move the cursor to the necessary date
format.
5. Push  to select the format and go back to Setup
gks38s.bmp
mode.
6. Choose a different selection or push the Done softkey
or s to save the settings and exit Setup mode.
Fluke-Direct
.ca
Documenting Process Calibrator
Figure 10. Edit the Date Format
1.800.868.7495
Date and Time
gks39s.bmp
27