Fluke 753 Getting Started
Documenting process calibrator
Hide thumbs
Also See for 753:
- User manual (130 pages) ,
- Calibration manual (52 pages) ,
- Getting started (22 pages)
Related Manuals for Fluke 753
Summary of Contents for Fluke 753
- Page 1 753/754 Documenting Process Calibrator Getting Started PN 3377694 July 2011 © 2011 Fluke Corporation. All rights reserved. Printed in USA. All product names are trademarks of their respective companies.
- Page 2 LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for three years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.
-
Page 3: Table Of Contents
Table of Contents Title Page Introduction ........................1 How to Contact Fluke ..................... 1 Safety Information ......................2 Before You Begin ......................3 Standard Equipment....................... 4 Operation Features ......................6 Input and Output Jacks....................6 Buttons ........................8 The Battery........................10... - Page 4 753/754 Getting Started...
-
Page 5: Introduction
Introduction How to Contact Fluke The 753 and 754 Documenting Process Calibrators (the To contact Fluke, call one of the following telephone Product) are battery-powered, hand-held instruments that numbers: measure and source electrical and physical parameters. • Technical Support USA: 1-800-44-FLUKE ... -
Page 6: Safety Information
753/754 Getting Started • Safety Information Do not exceed the Measurement Category (CAT) rating of the lowest rated Warning individual component of a Product, probe, or accessory. To prevent personal injury, use the Product • only as specified, or the protection supplied Measure a known voltage first to make by the Product can be compromised. -
Page 7: Before You Begin
For more information, see “The Battery” in the connected to the current terminals. 753/754 Users Manual. When the Battery is inside the • Use only cables with correct voltage Product, it will only charge if the Product is off. -
Page 8: Standard Equipment
753/754 Getting Started Standard Equipment Items included with the product are shown in Figure 1. TC Cap AC280 SureGrip Hook Clip Set (2 Red and 2 Black) Jumper Fluke-75X-Stackable Test Lead Set (3 Red and 3 Black) 754-8016, Strap Alligator Clip Set... - Page 9 Documenting Process Calibrators Standard Equipment Battery Charger/Universal Power Supply USB Cable Lithium Ion Battery Pack 753/754 Getting Started DPCTrack2 HART Communication Cable 753/754 Manuals gks02f.eps Figure 1. Standard Equipment (cont)
-
Page 10: Operation Features
753/754 Getting Started Operation Features Input and Output Jacks Figure 2 shows the input and output jacks and connectors. Table 1 explains their use. Table 1. Input/Output Jacks and Connectors Name Description HART jack (754 only) Connects the Product to HART devices. - Page 11 Documenting Process Calibrators Operation Features gks05f.eps Figure 2. Input/Output Jacks and Connectors...
-
Page 12: Buttons
Adjusts the backlight intensity (three levels). Enters and exits Setup mode to change operating parameters. (754) (754) Toggles between HART communication mode and analog operation. In calculator mode, this key supplies the square root function. (753) (753) Adjusts the Range of the Product. - Page 13 Documenting Process Calibrators Operation Features Table 2. Buttons (cont) Button Description Push or to increase display intensity. Push or to decrease intensity (six levels). , , Make choices from lists on the display. , Increase or decrease the source level when using the step feature. In calculator mode, provides arithmetic functions (+ - ÷...
-
Page 14: The Battery
753/754 Getting Started The Battery Figure 3 shows how to change and recharge the Battery. The Battery can be charged inside or outside of the Product with the Battery Charger. gks9f.eps Figure 3. Battery Removal and Charger Use... -
Page 15: Display Languages
Documenting Process Calibrators Display Languages Display Languages The Product shows information in five languages: • English • European French • Italian • German • Spanish To change the display language: Push s. Push Y twice. Push three times. Push . Push ... - Page 16 753/754 Getting Started...