Selecting 1-Mig/Pulse Mig Synergy Curves - Kemppi Kempact Pulse 3000 Operation Instructions Manual

3.3.3. Selecting 1-mig/pulse mig synergy curves

The program number of the synergy curve is selected using the plus-minus buttons and is displayed
on "SYNERGIC PRG".
The middle display is actual material group display (eg. SS, AL, CUS, FE, GEN). Wire diameter
(mm) can be seen on the right side. This information will only be displayed for a while.
The "PRG INFO" button gives more curve information:
One press will revert to the material group and diameter display, a second will display the type
number of the material and a third run through the gas consistency components one by one.
kEMPACT PULSE 3000 Synergic programs
1-MIG Pulse Double
Pulse
00
01
SS-group
s1 s1 s1
s2 s2 s2
s3 s3 s3
s4 s4 s4
s5
s7
Al-group
A1 A1 A1
A2 A2 A2
A6 A6 A6
A7 A7 A7
Cu-group
C1 C1 C1
C2 C2 C2
C3 C3 C3
C4 C4 C4
C5 C5 C5
C6 C6 C6
C7 C7 C7
C8 C8 C8
Fe-group
F1 F1 F1
F2 F2 F2
F3 F3 F3
F4 F4 F4
© Kemppi oy
wire, ø Material
All All
All All
0,8 mm ss 308 / 316
0,9 mm ss 308 / 316
1,0 mm ss 308 / 316
1,2 mm ss 308 / 316
0,9 mm ss 316 FC
1,2 mm ss 316 FC
1,0 mm Almg5 / Almg4,5mn
1,2 mm Almg5 / Almg4,5mn
1,0 mm Alsi5 / Alsi12
1,2 mm Alsi5 / Alsi12
0,8 mm Cusi3
0,9 mm Cusi3
1,0 mm Cusi3
1,2 mm Cusi3
0,8 mm CuAl8
0,9 mm CuAl8
1,0 mm CuAl8
1,2 mm CuAl8
0,8 mm Fe
0,9 mm Fe
1,0 mm Fe
1,2 mm Fe
Gas
All
All
Ar + 2 % Co ²
Ar + 2 % Co ²
Ar + 2 % Co ²
Ar + 2 % Co ²
Ar + 18 % Co ²
Ar + 18 % Co ²
Ar
Ar
Ar
Ar
Ar
Ar
Ar
Ar
Ar
Ar
Ar
Ar
Ar + 18 % Co ²
Ar + 18 % Co ²
Ar + 18 % Co ²
Ar + 18 % Co ²
Kempact pulse 3000, Kempactcool 10 / 0813 – 13
wire Feed
Range
1,0 - 18,0
0,5 - 18,0