Table of Contents
Advertisement
4. MAINTENANCE
4.1. DAILY MAINTENANCE
Be careful of mains voltage when handling electric cables!
Clean the wire channel of the gun and check the contact tip regularly. Always check the condition
of the mains and welding cable before operation and replace defective cables.
Note! Only a qualified electrician should remove or install the mains cable!
4.2. REGULAR MAINTENANCE
KEMPPI -service workshops sign special service contracts with customers for regular maintenance.
All parts are cleaned, checked and if necessary, repaired. The operation of the welding machine
is also tested.
4.3. DISPOSAL OF THE MACHINE
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!
5. ORDERING INFORMATION
Item
Kempact Pulse 3000
KempactCool 10
GH 30 Gun holder
PMT 25
PMT 25
PMT 27
PMT 27
PMT 32
PMT 32
PMT 30W
PMT 30W
PMT 35
PMT 35
WS 35
WS 35
WS 30W
WS 30W
0 – Kempact pulse 3000, Kempactcool 10 / 0813
Ordering number
621830002
621860001
6256030
3 m
6252513
4,5 m
6252514
3 m
6252713
4,5 m
6252714
3 m
6253213
4,5 m
6253214
6253043
6253044
3 m
6253513
4,5 m
6253514
6 m Al1,2
6253516A12
6 m Ss1,0
6253516S10
6 m Al 1,2
6254206A12
6 m Ss 1,0
6254206S10
© Kemppi oy
Hide quick links:
Advertisement
Table of Contents
