2.12. COOLING UNIT (kEMPACTCOOL 10)
Cooling liquid is injurious! Avoid also contact with skin or eyes. In case of injury,
seek for medical advice.
Cooling unit KempactCool 10 together with MIG-gun of Kemppi's PMT-W and MMT-W range
enables MIG welding with water-cooled gun.
The cooling unit is installed beneath the power source with screws and mounting plate. Electrical
connections are on the bottom of power source. Fill the reservoir with a 20 - 40 % mixture of etanol
and water, or with any other suitable antifreeze. The capacity of the reservoir is 3 litres.
Electrical connection
for the cooling unit:
Only an authorised electrician is allowed
to install electrical connection!
Filling the reservoir:
10 – Kempact pulse 3000, Kempactcool 10 / 0813
Installation of cooling unit:
The bottom of power source
1. 400 V
2. Control connector
3. Equipment earth
© Kemppi oy