Overview Of Installation - Siemens G120P Technical Manual

Variable speed drive

Hide thumbs Also See for G120P:

Operating instructions manual (496 pages)

Instruction manual (100 pages)

Hardware installation manual (94 pages)

Table Of Contents

Table of Contents

5.2 Overview of installation

Siemens

Building Technologies

NOTICE

Danger of property damage due to unsuitable site of installation!

Unsuitable ambient conditions can damage the device by impairing its ability to

function properly.

●

Only install the variable speed drive in areas which are free from jolts,

vibrations, electromagnetic fields, and corrosive gases.

●

Maintain the ambient conditions which are specified in the technical data,

such as temperature, pressure, humidity, etc. (Chapter Technical data

[➙ 93]).

●

Ensure that the correct level of ventilation and air flow is provided.

●

IP20 devices may only be operated in closed housings or in higher-level

control cabinets with protective covers that are closed, and when all of the

protective devices are used.

For detailed information about installation, please refer to chapter "Installation" in

the Operating Instructions for the Control Unit (A5E34257946A AC).

The process of installing a variable speed drive involves the following steps.

Please carry these out in the specified sequence:

Step

Activity

Where applicable, install the accessories

(reactors, filter or braking resistor) for the

Power Module

Installing Power Modules [➙ 30]

Connecting line and motor terminals

[➙ 31]

Installing the Control Unit [➙ 40]

Wiring terminal strips [➙ 41]

Where applicable, install the Installing the

operator panel [➙ 44]

Commissioning the variable speed drive

[➙ 50]

Installing

Overview of installation

Additional information

●

Instructions that are supplied with the

accessories

●