Before Using - Carscop CCTR-800+ User Manual

 Green Power LED OFF continuously
 Red GSM LED Flash once
 Red GSM LED Flash twice

Before Using:

1. At first to buy a GSM phone SIM card which have SMS service and incoming caller ID service & GPRS
data service, in which the SIM card phone number is the very tracker number and all the operation for the
tracker is to this number, such as locating immediately, add & delete preset number, change password, enable
over speed alarm, enable move alarm etc.
Note: this tracker use 2G GSM network, some 3G & 4G SIM card have 2G GSM network, these kind of 3G
& 4G SIM card can be used in this tracker, some SIM card need send SMS to active the GPRS data service.
Every month need about 10M-30M GPRS data according the different working mode, order an data package
can save money.
2. Power ON / OFF
 When power is OFF, press the "ON/OFF" button till the RED LED is ON, then release the button,
the tracker is powered ON, when the LED flash means the tracker is working well.
 When the power is ON, press the "ON/OFF" button till the Green LED Flash fast, and then
release the button,and press the ON/OFF 3 times，the tracker will turn off LED & tracker.
 When power is OFF, recharge the tracker, the tracker will power on automatically.
3. Install SIM card: Pulling out the long narrow rubber stopple beside the tracker, you can see the SIM
card socket, beside which, press the yellow switch button with a tool and then the holder will come out. Pull it
out and put the SIM card in the holder and then push the holder into the tracker (Pay attention to that the SIM
card metal contact pin can not face down to the holder), and push the long narrow rubber stopple into the
tracker to cover the SIM card socket.
Note: Before install or uninstall the SIM card, please power off the tracker.
4. Recharge the tracker
: Power off
: Upload location to server OK
: Upload location to server Fail
-3-