Check Tracker Setting; Re-Power On & Reset Tracker; Back To Factory Default Configuration - Carscop CCTR-800+ User Manual

a command, "123456" is password, the tracker will send back information " Cancel All Alarm Setting", and
cancel all alarm setting (including the 4 alarm setting in 12, also cancel geo-fence alarm,over speed alarm) .
This command will cancel all alarm setting, including the 4 alarm canceled in 12, also this command will
cancel Geo-fence alarm & over speed alarm.
Note: RESET and FACTORY also can cancel all alarm setting, please see the following.

14. Check tracker setting

Send SMS "CHECK*123456" to the tracker number, "CHECK" is the fixed command, "123456" is
password. The tracker will send back information including software version, ID S/N number, IP address,
authorized phone number, GPS and GSM signal etc, normally this command is used to test the tracker is
working well or not. The following is an example :
800+,V 04 28 2015,CC830,800201412345678,MODE:1,REPORT:0,d3.igps.info,58.64.155.133,
8011,300,A:13987654321,B:13876543210,C:13765432101,GPS 9,GSM:-95dBm,CMNET,User,Password,
460,00,255,1,9376,3613,07,88%
800+
V 04 28 2015
CC830
800201512345678
MODE:1
Report:0
58.64.155.133,8011 :Server IP & Port
300
A:13987654321,B:13876543210,C:13765432101
GPS 9
GSM:-95dBm
CMNET
User
Password
460,00,255,1,9376,3613,07
88%
15. Re-power On & Reset Tracker
Send SMS "RESET*123456" to the tracker number, "RESET" is a command, "123456" is password. The
tracker will send back information "Reset Tracker and cancel all alarm setting", then the tracker will power off
and then power on automatically, and this command will not cancel user setting.

16. Back to Factory Default Configuration

Send SMS "FACTORY*123456" to the tracker number, "FACTORY" is the fixed command, "123456" is
:Product model
:Software version
:Protocol(CC800/CC828/CC830/CC630 etc)
:ID number
:System Working Mode
:Report Mode
:Upload Time Interval
:GPS signal (Satellite)
:GSM signal
:Current APN
:GPRS User Name
:GPRS Password
:GSM Base Station Information
"MCC,MNC,TA,NUM,LAC, CID,RXLEV ,LAC2,CID2,RXLEV2..."
:Built in Battery Power
-20-
:Authorized Number