Download Print this page

Before Using - Carscop CCTR-803B Manual

Car gps tracker

Advertisement

Product
CCTR-803B
Microphone
Socket

Before Using

1.
Power ON / OFF
If the tracker is powered OFF, turn the switch to the on position with slim stick, the tracker will power on,
the LED will flash, please refer the following 3 for detail LED flash indicator.
If the tracker is powered ON, turn the switch to the off position with slim stick, the tracker will power off.
2.
Install SIM card
Lift the SIM card room cover by finger, the location is as the following diagram, Push the SIM card cover
up to release the socket (to "OPEN" direction in the following diagram), and put the SIM card into socket (Pay
attention to that the SIM card metal contact pin need face down to the socket), cover the SIM card cover and
push the cover down to "LOCK" direction to lock the SIM card. And then put the SIM card room cover into the
case.
Lift the cover
by finger
Note:
1> This tracker use 2G GSM network, and it upload tracking only through GPRS, it can not work in CDMA
network or 3G(WCDMA or CDMA2000) network. (Many 3G/4G SIM card can use 2G GSM network, this
kind of SIM card can be used in this tracker).
Holder
Indicator
ON/OFF
Switch
SIM
LED
-2-
Wires
SOS Button
External microphone

Advertisement

loading