Set The Geo-Fence Name By Sms; Check Geo-Fence Alarm Setting; Check Alarm Setting; Cancel Shock Alarm - Carscop CCTR-800+ User Manual

center point of the gen-fence E circle, and set GGG km as the radius of the gen-fence E circle. the tracker will
send back the information "Set Geofence (E) 22.680307N,114.146843E, GGGkm".
Note：This command only set the geo-fence circle center point & radius, not enable the geo-fence alarm,
the geo-fence circle center point longitude & latitude user can check on the Google earth. This command is
used to set the geo-fence but the tracker are not in that place now.

Set the Geo-Fence Name by SMS

Send SMS "FENCENAME*123456*A*SCHOOL" or "224*123456*A*SCHOOL" to the tracker number,
"FENCENAME" and "224" are command, "123456" is password, "A" is the geo-fence A, total can be set 5
geo-fence A / B / C / D / E, "SCHOOL" (max 10 letters) is the setting name of the geo-fence A. After receive the
command, the tracker will set the name of geo-fence A as SCHOOL, later when the tracker send geo-fence
alarm information, the name will be in the alarm information, so that user can easy know which geo-fence is
break. For example:
Out Geofence (C)(SCHOOL) Alarm
https://maps.google.com/maps?q=22.67680N,114.15188E
Battery:88%

Check Geo-Fence Alarm Setting

Send SMS "FENCE*123456" or "229*123456" to the tracker number, "FENCE" and "229" are command,
"123456" is password, the tracker will send back the information of every geo-fence alarm setting, for
example:
Fence A (SCHOOL) ,In:ON,Out:ON; Fence B (HOME) ,In:ON,Out:ON; Fence C
(Grandma) ,In:ON,Out:OFF;Fence D (Uncle) ,In:OFF,Out:ON; Fence E (RIVER) ,In:OFF,Out:OFF;

11. Check Alarm Setting

Send SMS "ALARM*123456" or "110*123456" to the tracker number, "ALARM" and "110" are command,
"123456" is password, the tracker will send back the information of the alarm setting, for example:
Shock Alarm:ON,OverSpeed:OFF(100km/h),Auto Cycle SMS Tracking: OFF,Auto SMS Real Tracking:
OFF,Working Mode 3&4 (Cycle On/Off Locate):OFF,Geo-Fence:ON.
If the authorized number have been set, use the authorized phone number to send SMS "ALARM#" or
"110#" to the tracker also can trigger the tracker to check balance.
12. Cancel Shock Alarm / Auto Cycle SMS Tracking / Auto SMS Real Tracking / Working Mode 3&4
Send SMS "000*123456" to tracker, "000" is a command, "123456" is password, the tracker will send back
information " Shock Alarm / Auto Cycle SMS Tracking / Auto SMS Real Tracking / Working Mode 3&4 Alarm
Cancel", and cancel these alarm setting.
Note: RESET and FACTORY also can cancel all alarm setting, please see the following.
13. Cancel All Alarm Setting (Including 12)
Send SMS "CANCELALARM*123456" or "000000*123456"to tracker, "CANCELALARM" and "000000" is
-19-