Sending Sms Trigger Reply Google Map Link Sms; Lbs Located (Gsm Network Cell Id Locate); Auto Sms Cycle Tracking - Carscop CCTR-800+ User Manual

4. Sending SMS trigger reply Google map link SMS(Platform is not necessary):
Send SMS "URL*123456" or "456*123456" to the tracker also can trigger the tracker locate & reply SMS
with current location with Google map link, "URL" and "456" is a command, "123456" is password; if the
password is not right, the operation is fault, the tracker will send back information "Wrong Password.
If the tracker has set the authorized phone number, then send SMS "URL#" or "456#" also can
the tracker locate & reply SMS with current location text description, the password is not necessary any more.
The SMS examples is same as follow:
http://maps.google.com/maps?q=N40.756441,W73.986378
Battery:91%

5. LBS Located (GSM network Cell ID Locate):

When the tracker is triggered to locate, if the tracker is in the place where there is no GPS signal, such as
underground park, indoor room, the tracker will reply SMS with CELL ID location to user, and the precision is
about 50-500m, according to the around mobile phone base station density. The location SMS is like below,
click the link the map is same with the above 2.
No GPS signal, just Cell ID Location
http://maps.google.com/maps?q=N40.756441,W73.986378
Battery:91%
Note: The LBS location precision is not very high, in the city maybe 30-50 meters, in country side maybe
over 300 meters according the GSM base station density. So this location only can be used as a reference. If
the LBS can not locate either, the tracker will reply "Can not Locate now, Please Try Later !".
6. Auto SMS Cycle Tracking(No Platform, Suit for Moving Equipment):
Send SMS "LOCATE*123456*MMM"
"456*123456*MMM"
password, "MMM" is the locating time interval, unit is minutes. After the operation success, the tracker will reply
"SMS Cycle Tracking, Interval is MMM minutes", and then the tracker will locate every MMM minutes, and
to the tracker, "LOCATE" and "123" and "URL" and "456" are command, "123456" is
or "123*123456*MMM"
-8-
or "URL*123456*MMM"
trigger
or