Carscop CCTR-800+ User Manual page 4

 We recommend using OEM charger to recharge the tracker. this tracker use the 5V DC voltage to
recharge, so too high voltage or AC voltage may damage the tracker or even cause accidents.
 Use the car adapter or home charger or PC USB to recharge the tracker: insert the USB wire into
the charge board and car adapter or home charger or PC USB, and put the tracker on the
charging board, If the LED on the adapter is RED, it means it is recharging, if the LED on the
adapter is GREEN, it means the recharging is finished. This will take about 8-10 hours.
 Also use the USB charging wire insert to the tracker charging socket and connect the wire to any
USB can charge the tracker. This maybe take over 10 hours according to the different charging
current.
 Also this tracker can connect to the car battery all the time by using the external power adapter
(9-30V input 5V output), just insert the external power adapter output wire to the tracker charging
socket and connect the external power adapter input to the car battery (9-30V) is OK, after the
battery is full ,the tracker will stop charging and use the external power adapter for working, the
built in battery is only for backup.
-4-