Table of Contents
Advertisement
LSQT1025(ENG).book 104 ページ ２００６年２月４日 土曜日 午後６時１０分
Disc and card management
Formatting discs and cards
Formatting discs and cards
Formatting discs
This is for initializing discs.
Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬ Rotate the mode dial to select
1 Press the MENU button, then select [
# [
FORMAT DISC] # [YES] and press the
joystick.
≥ When formatting a DVD-RAM, skip to step 3.
2
(When formatting a DVD-RW only)
Select format type (l 21), then press the joystick.
3 When the confirmation message appears, select [YES], then press the
joystick.
≥ When formatting is complete, press the MENU button to exit the message screen.
≥ In the case of a double sided disc, format each side.
≥ It may not be possible to format a disc with many
scratches or dirt. Such discs cannot be used.
≥ During formatting, do not turn this unit off.
≥ When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
104
LSQT1025
.
SETUP]
Formatting DVD-RAM:
≥ We recommend formatting on this unit. If formatting
on a computer, use the supplied software. For more
details, refer to the operating instructions of the
software.
If you connect this unit to a computer to format a
DVD-RAM, you cannot use DVDForm (l 119) to
physically format it. Use a separate DVD-RAM drive
to physically format a DVD-RAM.
Formatting DVD-RW:
≥ Format on this unit.
(RAM) (-RW‹VR›) (-RW‹V›)
Advertisement
Table of Contents
