LSQT1025(ENG).book 144 ページ 2006年2月4日 土曜日 午後6時10分
Indications
Messages
CANNOT RECORD.
NO DATA.
INCOMPATIBLE DISC.
PLEASE CHECK THE
DISC.
FOR BEST
PERFORMANCE
PANASONIC DISC IS
RECOMMENDED.
CANNOT RECORD IN AGS
MODE.
CANNOT RECORD.
(THIS DISC IS FINALIZED)
CANNOT RECORD. DISC
IS FULL.
CANNOT RECORD. THE
NUMBER OF SCENES HAS
EXCEEDED THE MAXIMUM
LIMIT.
INTERNAL TEMPERATURE
TOO HIGH. PLEASE TURN
UNIT OFF AND WAIT A
WHILE.
144
LSQT1025
Data writing to the disc or card has failed.
There are no images recorded on the disc or card.
You inserted an incompatible disc (copy-protected discs, etc.).
You inserted a disc that cannot be read on this unit (a disc
recorded in NTSC video format etc.).
You inserted a disc that does not meet the DVD standard for
quality and performance so you may not be able to record
normally. Refer to the following support site for information
about discs that have been confirmed as compatible by
Panasonic.
http://panasonic.co.jp/pavc/global/cs/e_cam
(This website is in English only.)
The AGS function is activated. (l 51)
A finalized DVD-RW (Video format) or DVD-R has been
inserted. After finalizing, the discs become play-only and cannot
record. If you un-finalize a DVD-RW (Video format), it can be
used for recording. (l 107)
The disc is full or the number of scenes has reached the
maximum limit so no further data can be recorded. Delete
unnecessary scenes (l 87) or insert a new disc.
The temperature of the unit is high so it cannot be operated.
Turn off the power, wait until the unit cools and then turn on the
power again.