Table of Contents
Advertisement
LSQT1025(ENG).book 145 ページ ２００６年２月４日 土曜日 午後６時１０分
CANNOT UN-FINALIZE
THIS DISC.
CHECK CARD.
CARD LOCKED.
CARD FULL.
PUSH THE RESET
SWITCH.
CHANGE TO MANUAL
MODE.
CANCEL NIGHT VIEW
MODE
TURN OFF POWER LCD.
CANNOT SET.
CHANGE MODE TO USE
USB.
DISCONNECT USB
CABLE.
DISCONNECT USB
CABLE.
DISCONNECT USB
CABLE.
DVD-R cannot be un-finalized.
DVD-RW (VR format) cannot be un-finalized. DVD-RW (VR
format) after finalization can be recorded and edited in the same
way as DVD-RW (VR format) before finalization.
This card is not compatible or it cannot be recognized by the
unit.
The write protection switch on the SD Memory Card is set to
LOCK. (l 23)
The SD card is full so no further data can be recorded. Delete
unnecessary files (l 100) or insert a new SD card.
An irregularity in the unit has been detected. Press the RESET
button to restart the unit. (l 154)
You are attempting to use a function that cannot be used
simultaneously.
With DVD-RW (Video format) and DVD-R, if the number of
dates displayed becomes 99 when [PLAY MODE] is set to
[BY DATE], you cannot switch the wide setting.
The USB cable is connected in the recording mode.
You are attempting to turn the mode dial with the USB cable
connected to the unit.
The unit's power cannot be turned off when the unit is
connected to the computer.
The unit cannot correctly establish the connection to the
computer or printer. Disconnect and then reconnect the USB
cable or check the [USB FUNCTION] setting on this unit.
Indications
145
LSQT1025
Advertisement
Table of Contents
