Disc And Card Management; Formatting Discs And Cards; Formatting Discs - Panasonic VDR-D250EP Operating Instructions Manual

LSQT1019(ENG).book 104 ページ ２００６年２月３日 金曜日 午後４時３７分

Disc and card management

Formatting discs and cards

Formatting discs and cards

Formatting discs

This is for initializing discs.
Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬ Rotate the mode dial to select
1 Press the MENU button, then select [
# [ FORMAT DISC] # [YES] and press the
joystick.
≥ When formatting a DVD-RAM, skip to step 3.
2
(When formatting a DVD-RW only)
Select format type (l 21), then press the joystick.
3 When the confirmation message appears, select [YES], then press the
joystick.
≥ When formatting is complete, press the MENU button to exit the message screen.
≥ In the case of a double sided disc, format each side.
≥ It may not be possible to format a disc with many
scratches or dirt. Such discs cannot be used.
≥ During formatting, do not turn this unit off.
≥ When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
≥ Use this unit to format discs. This unit may not
recognize some discs that have been formatted
using a computer or a device other than this unit.
104
LSQT1019
.
SETUP]
(RAM) (-RW‹VR›) (-RW‹V›)