Table of Contents
Advertisement
LSQT1025(ENG).book 136 ページ ２００６年２月４日 土曜日 午後６時１０分
Creating a DVD-Video disc on a computer
8 Insert a brand-new DVD-RW or DVD-R disc into the unit.
9 When the [CollectTool] screen appears, click [OK].
The exported scene will be automatically registered on the DVDfunSTUDIO
editing screen.
10 Edit the DVD menu as required.
≥ Set the disc size to [8 cm DVD].
11 Click [Burning].
Writing to the disc starts.
When writing is complete, the disc is ejected automatically.
≥ The DISC EJECT lever on this unit does not work
when the unit is connected to a computer. Use the
software's eject button to eject the disc. (When not
using the software, use Windows Explorer to right-
click the drive icon for this unit and select [Eject].)
≥ Title names set using DVD-MovieAlbumSE cannot
be displayed on this unit. Also, the names of
playlists created on this unit cannot be displayed on
DVD-MovieAlbumSE.
Take care that the temperature of the unit, when connected to a computer, does not rise
excessively (reference for usage: approx. 30 minutes at about 30 °C).
136
LSQT1025
≥ If you export an image recorded in 16:9 aspect ratio
with DVD-MovieAlbumSE, it is saved as a 4:3
aspect image that has been squeezed horizontally.
If you then use the exported image with
DVDfunSTUDIO, it is displayed as a 16:9 aspect
image.
≥ The DVD menu created with DVDfunSTUDIO does
not appear on this unit. Play back the disc on a DVD
player.
≥ You cannot add data to a disc written to with
DVDfunSTUDIO as the disc is finalized after writing.
Advertisement
Table of Contents
