Disc And Card Management; Formatting Discs And Cards; Formatting Discs - Panasonic VDR-D150GC Operating Instructions Manual

LSQT1049(ENG).book 197 ページ ２００５年１２月２０日 火曜日 午後６時４５分

Disc and card management

Formatting discs and cards

Formatting discs

This is for initializing discs.
Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬ Rotate the mode dial to select
1 Press the MENU button, then select [
FORMAT DISC] # [YES] and press the joystick.
[
≥ When formatting a DVD-RAM, skip to step 3.
2
(When formatting a DVD-RW only)
Select format type (l 128), then press the joystick.
3 When the confirmation message appears, select [YES], then press the
joystick.
≥ When formatting is complete, press the MENU button to exit the message screen.
≥ During formatting, do not turn this unit off.
≥ When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
≥ In the case of a double sided disc, format each side.
≥ It may not be possible to format a disc with many
scratches or dirt. Such discs cannot be used.
.
SETUP] #
≥ Use this unit to format discs. This unit may not
recognize some discs that have been formatted
using a computer or a device other than this unit.
Formatting discs and cards
(RAM) (-RW‹VR›) (-RW‹V›)
197
LSQT1049