Table of Contents
Advertisement
LSQT1025(ENG).book 14 ページ ２００６年２月４日 土曜日 午後６時１０分
Parts identification and handling
Fitting the lens cap (Supplied: VDR-D250 only)/(Included in the Filter Kit
(VW-LF37WE; optional))
Fit the lens cap to protect the surface of the lens.
≥ When the MC protector or the ND filter of the Filter Kit (VW-LF37WE; optional) is attached to the
front of the lens hood, use the lens cap included in the Filter Kit.
1 Pass the end of the lens cap cord through the belt.
2 Pass the lens cap through the loop made by itself.
3 To fit or remove the lens cap, hold both sides of
the lens cap with the tips of your finger and
thumb.
During recording
The lens cap removed can be attached to the lens cap fixture.
14
LSQT1025
Advertisement
Table of Contents
