Table of Contents
Advertisement
LSQT1025(ENG).book 48 ページ ２００６年２月４日 土曜日 午後６時１０分
Adjusting LCD monitor/viewfinder
Adjusting LCD monitor/viewfinder
Adjusting the brightness and colour level
1 Press the MENU button, then select [
# [
LCD SET] or [
press the joystick.
2 Move the joystick up or down to select the item to
be adjusted. Then, move the joystick left or right
to make the adjustment.
The bar display moves.
[
LCD SET]
:
Brightness of the LCD monitor
:
Colour level of the LCD monitor
[
EVF SET]
EVF
: Brightness of the viewfinder
EVF
≥ To adjust the brightness of the viewfinder, close the
LCD monitor and extend the viewfinder to activate
it.
≥ When the LCD monitor is rotated by 180° towards
the lens, the brightness and colour level of the LCD
monitor cannot be adjusted.
∫ In order to increase the brightness of the entire LCD monitor
Press the POWER LCD button.
The [
] indication appears on the LCD monitor.
≥ The entire LCD monitor will become approx. twice
as bright as the normal.
≥ When the POWER LCD button is pressed again,
the [
] indication disappears and the original
brightness is restored.
48
LSQT1025
SETUP]
EVF SET] # [YES] and
EVF
≥ These settings will not affect the images actually
recorded.
≥ This will not affect the images to be recorded.
≥ If you turn on the unit when the AC adaptor is used,
this function will automatically be activated.
Advertisement
Table of Contents
