Table of Contents
Advertisement
LSQT1025(ENG).book 84 ページ ２００６年２月４日 土曜日 午後６時１０分
Motion picture playback
Playing back motion pictures by date
Recorded scenes are grouped by date on this unit.
Scenes recorded on the same day can be played back in succession.
1 Press the MENU button, then select
PLAY SETUP] # [
[
[BY DATE] and press the joystick.
≥ When [PLAY MODE] is set to [VIEW ALL], all recorded motion
pictures will be played back in succession. ([
displayed.)
2 Select the date for playback, then press the
joystick.
The scenes recorded on the same day are displayed as thumbnails.
3 Select the scene to be played back.
≥ Even if scenes are recorded on the same day, they are grouped separately in the following cases.
– When the number of scenes exceeds 99 (RAM) (-RW‹VR›) (-RW‹V›) (-R)
– When the disc is removed (-RW‹V›) (-R)
– When the [REC ASPECT] setting is changed (-RW‹V›) (-R)
– When the disc is repaired (-RW‹V›) (-R)
– When the mode dial is switched (-R)
– When the power is turned off (-R)
Resuming the previous playback
Press the MENU button, then select
PLAY SETUP] # [
[
press the joystick.
If playback of a motion picture is stopped, [R] appears on the thumbnail
view of the stopped scene.
≥ If playback is stopped at any point during a motion picture while
[RESUME PLAY] is set to [OFF], the next time the motion picture is played back, it will be from
the beginning.
≥ The resume position memorized is cleared if you
turn off the power or operate the mode dial, but the
menu setting is not cleared.
84
LSQT1025
PLAY MODE] #
ALL] is
RESUME PLAY] # [ON] and
Advertisement
Table of Contents
