Table of Contents
Advertisement
LSQT1025(ENG).book 16 ページ ２００６年２月４日 土曜日 午後６時１０分
Parts identification and handling
Using the LCD monitor
You can record the image while viewing it on the LCD monitor.
1 Place your finger on OPEN and pull
the LCD monitor out in the direction of
the arrow.
≥ It can open up to 90o.
2 Adjust the angle of the LCD monitor according to your preference.
≥ It can rotate up to 180o A towards the lens or 90o B towards the viewfinder.
A
≥ The brightness and colour level of the LCD monitor
can be adjusted from the menu. (l 48)
≥ If it is forcibly opened or rotated, the unit may be
damaged or fail.
Using the viewfinder
Pull out the viewfinder.
The viewfinder will be activated. (If the LCD monitor is opened,
the viewfinder will be deactivated.)
≥ The brightness of the viewfinder (l 48) and the
field of view (l 49) can be adjusted.
16
LSQT1025
B
≥ If the LCD monitor is rotated by 180x towards the
lens and the viewfinder is extended (when recording
yourself), the LCD monitor and the viewfinder
simultaneously light.
Advertisement
Table of Contents
