Chapter 8 Menu Description Tables; Menu Configuration - Panasonic AJ-SPX800 Operating Instructions Manual

Chapter 8 Menu Description Tables

8-1

Menu Configuration

MENU
USER MENU
MAIN MENU
OPTION MENU
OPTION
Opening the Menus
USER MENU:
Displayed when the MENU button is
pressed.
MAIN MENU:
Displayed when the MENU button is
pressed for at least 3 seconds.
OPTION MENU:
Displayed when the MENU button is
pressed while pressing the LIGHT button.
<Notes>
The following items can be set: 42 camera-related items (14
The items highlighted in grey cannot be selected by <USER MENU SELECT>.
The underlined items can only be selected as one whole page (with all sub-items). Individual sub-items cannot be selected
separately.
About Menu Description Tables
The following letters indicate whether the modified menu data is saved to
or read out from the memory.
–
The indicates that the data cannot be saved or read.
S = Can be saved and read as scene data file.
C = Can be saved or read using CARD READ/WRITESD.
U = Can be saved and read as user data.
Please refer to [8-7-4 SCENE] and [8-7-5 INITIALISE].
F = Can be read using READ FACTORY DATA.
Please refer to [8-7-5 INITIALISE].
E = Can be saved using ECU DATA SAVE.
Please refer to [5-8 Connecting the Extension Controller (AJ-
EC3P)].
90
SYSTEM SETTING
PAINT
VF
CAM OPERATION
MAIN OPERATION
FILE
MAINTENANCE
USER MENU SELECT
3 pages), 14 recording-related items (1 page).
Items/
Data Saved
REC SIGNAL
– C U F E
This section shows the
adjustable range of the
set value, and available
options for this item.
ROP
MATRIX
COLOR CORRECTION
LOW SETTING
MID SETTING
HIGH SETTING
ADDITIONAL DTL
SKIN TONE DTL
KNEE/LEVEL
GAMMA
FLARE
CAMERA SETTING
CAMERA ID
SHUTTER SPEED
SHUTTER SELECT
USER SW
SW MODE
WHITE BALANCE MODE
USER SW GAIN
IRIS
SD CARD READ/WRITE
SD CARD R/W SELECT
LENS FILE
SCENE
INITIALIZE
SYSTEM SETTING(USER)
PAINT(USER)
VF(USER)
CAM OPE(USER)
MAIN OPE(USER)
FILE(USER)
MAINTENANCE(USER)
Adjustabl
e Range
CAM Select video input signals.
CAM Record the signal from the camera
VIDEO
VIDEO: Record the signal from the GENLOCK
1394
IN terminal
1394: Record the signal from the 1394 input
terminal. (When the optional unit is
attached.)
About the settings available for this
item.
SYSTEM MODE
OPTION MODE
REC FUNCTION
OUTPUT SEL
LCD MONITOR
GENLOCK
VF DISPLAY
VF MARKER
USER BOX
VF INDICATOR1
VF INDICATOR2
MODE CHECK IND
! LED
BATTERY/P2CARD
BATTERY SETTING1
BATTERY SETTING2
MIC/AUDIO 1
MIC/AUDIO 2
TC/UB
UMID SET/INFO
SYSTEM CHECK
LENS ADJ
BLACK SHADING
WHITE SHADING
DIAGNOSTIC1
DIAGNOSTIC2
HOURS METER
Remarks