Cleaning Cycle - Fujitsu fi-5950 Operator's Manual
Hide thumbs
Also See for fi-5950:
- Operator's manual (257 pages) ,
- Getting started (27 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
8.13 Cleaning Cycle
The cleaning cycle of the scanner is specified by this setting. The background color of the counter on
changes to yellow when the sheet count exceeds the value specified here. A message that prompts
126
cleaning may also appear as described in Section
.
Counter" on page 123
1.
Start up the Software Operation Panel.
Refer to
"8.1 Scanner Settings" on page 175
2.
Select [Device Setting 2] from left side list in the window, and select
[Cleaning Cycle] from its lower level.
3.
Specify the cleaning cycle to change the background color for each
consumable.
Setting is available from 1,000 to 255,000 with 1,000 increment. Default is 10,000.
Also, specify whether to display the message to ask operator clean the scanner.
208
8.13 Cleaning Cycle
"5.2 How to check and reset the Consumable/Cleaning
.
page
Advertisement
Table of Contents
