Feeding Documents Manually - Fujitsu fi-5950 Operator's Manual

2.12 Feeding Documents Manually

Besides the "Automatic Feed Mode" which automatically scans the document set on the hopper, the scan-
ner can also scan documents in the "Manual Feed Mode".
In addition, the "Manual Feed Mode" is divided into 2 types:
<1> Single Feed: Only one sheet is manually fed and scanned. This is
suitable for
 thick paper, envelopes and folded paper and other types of documents that are difficult to
scan using Automatic Feed Mode. (In case of folded paper, make the folding line as the
leading edge).
 reducing the load on the hopper.
 making sure a certain page is scanned.
<2> Continuous Feed: Multiple sheets of document are manually fed
one at a time and continuously scanned. This is suitable for
 manual feed, even if multiple sheets are mistakenly fed, the scanner will scan one at a
time.
 selectively scanning a stack of document.
 making sure certain pages are scanned.
The procedure is described below.
36

2.12 Feeding Documents Manually