Scanning Documents - Fujitsu fi-5950 Operator's Manual

2.10 Scanning Documents

This section explains about the basic flow of scanning operations.
In order to use the scanner to scan documents, you need a scanner driver and an application that supports
the driver.
This product bundles the TWAIN driver and the ISIS driver (compliant to the respective standards), and an
application called "ScandAll PRO" which supports both drivers.
HINT
1. Load the documents on the hopper.
Refer to the section
2. Adjust the stacker table to the document size.
ATTENTION
30

2.10 Scanning Documents

For details about the scanner drivers, refer to the following:
- "2.13 Configuring the Scan Settings" on page 43
- TWAIN Driver Help
- ISIS Driver Help
For details about ScandAll PRO, refer to the following:
- ScandAll PRO User's Guide
- ScandAll PRO Help
"2.6 Loading Documents on the Hopper" on page
When loading long documents on the hopper, extend the stacker exten-
sion.
When loading short documents on the hopper, adjust the stacker length
with the small stopper.
17.