Fujitsu fi-5950 Operator's Manual page 164

Symptom 10
Have you cleaned the rollers?
Do the documents satisfy the con-
ditions described under the "Pre-
cautions" in "7.2 Document Quality"?
Have you ajusted the scan scale
If the problem can not be resolved with this flowchart, refer to
"6.4 Before Contacting a Service Provider."
After checking the items given in section 6.4, contact an authorized
FUJITSU scanner service provider or your dealer.
(*1) Refer to "4 DAILY CARE" on page
(*2) Refer to "7.2 Document Quality" on page
(*3) Refer to "8 SCANNER SETTINGS" on page
The scanned images are elongated.
NO
YES
NO
YES
NO
YES
105.
161.
173.
Clean the rollers. (*1)
Use documents that satisfy
the requirements. (*2)
Use the Software Operation
Panel to adjust the scan scale.
(*3)
6.3 Troubleshooting
6
153