Offset/Scan Scale - Fujitsu fi-5950 Operator's Manual

8.3 Offset/Scan scale

When the position of the scanned image is not correct or the image is elongated, use the following proce-
dure to adjust the Offset and the Scan scale for correction.
ATTENTION
1. Start up the Software Operation Panel.
Refer to
"8.1 Scanner Settings" on page 175
2. Select [Device Setting] from left side list in the window, and press
[Offset...].
The factory default setting are appropriate, so normally there is no need to
make any adjustment.
.

8.3 Offset/Scan scale

8
191