Overscan Control - Fujitsu fi-5950 Operator's Manual
Hide thumbs
Also See for fi-5950:
- Operator's manual (257 pages) ,
- Getting started (27 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
8.27 Overscan Control
Specify [Optimize] when you use Overscan and the image is partially missing due to an abnormal skew.
You can detect abnormal image skew and set sufficient amount of black margins on the top and the bottom
so that the whole image is contained.
missing
When parts of the image are
missing
Configure the settings for Overscan Control as follows.
1.
Start up the Software Operation Panel.
Refer to
"8.1 Scanner Settings" on page 175
2.
Select [Device Setting 2] from left side list in the window, and select
[Overscan Control] from its lower level.
222
8.27 Overscan Control
Added margin
Added margin
When [Optimize] is specified
.
Advertisement
Table of Contents
