3.1 Double Sided Scanning
When you want both sides of a document to be scanned at the same time, set the feeding option to
"Duplex".
Below is the procedure with TWAIN driver.
1.
Set the document on the hopper.
Refer to section
2.
Adjust stacker in accordance with document size.
Refer to section
3.
Start TWAIN driver with the application used.
Refer to section
4.
Set the [Scan Type:] to "ADF (Duplex)".
5.
Set resolution and document size and so on, and then click [Scan] button.
"2.6 Loading Documents on the Hopper" on page
"2.7 Setting up the Stacker" on page
"2.10 Scanning Documents" on page
17.
22.
30.
3.1 Double Sided Scanning
3
69
Need help?
Do you have a question about the fi-5950 and is the answer not in the manual?
Questions and answers