Xerox® Squarefold® Trimmer; Gbc® Advancedpunch; Cz Fold Unit; Required Finishing Accessories - Xerox Color C60 User Manual

Xerox® SquareFold® Trimmer
GBC® AdvancedPunch

CZ Fold Unit

The optional folder enables you to create publications featuring bi-fold, C-fold, Z-fold,
and Engineering Z-fold.

Required Finishing Accessories

Depending on the type of finishing device you use, one of the following accessories may
also be required.
Xerox ® Color C60/C70 Printer
User Guide
This optional finishing device is used in conjunc-
tion with a finisher that contains a booklet maker.
The booklet is assembled and stapled in the
booklet area of the finisher and enters the Trim-
mer Module already assembled.
The trimmer module flattens the booklet spine
which reduces the booklet's thickness and gives
it the appearance of a perfect-bound book. It
then trims/cuts away the face (edge) of the
booklet, resulting in a neat finished edge.
The GBC ® AdvancedPunch finishing module provides another
level of finishing to your output by allowing you to punch holes
in 8.5 x 11 in./A4 documents that support a variety of binding
styles. For 8.5 x 11 in media, the punch supports from 19 holes
to a maximum of 32 holes. A4 media supports from 21 holes up
to 47 holes.
This device requires an Interface Module and a follow-on finisher.
The Interface Module uncurls paper and provides a communica-
tion hub to the print engine and controller. A follow-on finisher,
such as the Standard Finisher, is necessary to gather punched
output.
For more information, go to www.xerox.com and select the GBC
AdvancedPunch User Documentation.
Product Overview
2-13