Sensor (tray 1 media out) removal
1
Remove the right cover.
2
Remove the rear lower door. See
3
Remove the LVPS. See
4
Remove the left cover. See
5
Remove the board housing. See
6
Remove the media tray. See
7
Remove the pick roller assembly. See
8
Remove the media feeder. See
9
Disconnect the cable (A) from the sensor (tray 1 media out).
"Right cover removal (MX71x)" on page
"Rear lower cover removal" on page
"LVPS removal" on page
"Left cover removal (MX71x)" on page
"Board housing removal" on page
"Media tray removal" on page
"Pick roller assembly removal" on page
"Media feeder removal" on page
Repair information
438.
551.
445.
416.
431.
538.
429.
543
541.
7463