Lexmark MX71 Series Repair Manual page 235

3
Remove the screw (A) securing the sensor.
4
Pull the sensor bracket to access the sensor. Disconnect the cable (B).
5
Release the latches securing the sensor to the bracket, and then remove the sensor.
Sensor (ADF elevator tray home position) removal
1
Remove the ADF rear cover. See
2
Remove the mylar and release the hooks securing the sensor (ADF elevator tray home position) to the machine.
3
Remove the sensor (ADF elevator tray home position).
"ADF rear cover removal" on page
Repair information
605
598.
7463