5
Release the latches (A) securing the sensors.
6
Remove the stapler output bin LED. See
7
Remove the left and right tamper motors. See
(right) removal" on page
8
Remove the tamper drive belts. See
9
Remove the two screws (B) from the tamper assembly.
10
Pull away the tamper assembly, and remove.
Installation note: Make sure the tab (C) is correctly inserted into its designated slot.
"Stapler output bin LED removal" on page
"Tamper motor (left) removal" on page 872
871.
"Tamper drive belt removal" on page
Repair information
873.
870
7463
874.
and
"Tamper motor