Lexmark MX71 Series Repair Manual page 497

5
Disconnect the cable (B) from the sensor, and then release the latches securing the sensor to the frame.
6
Pull the sensor off the frame and remove.
Sensor (left tamper motor HP) removal
1
Remove the finisher left cover. See
2
Remove the finisher right cover. See
3
Remove the finisher top cover. See
"Staple, hole punch left cover removal" on page
"Staple, hole punch right cover removal" on page
"Staple, hole punch top cover removal" on page
Repair information
867
7463
842.
843.
864.