Warning—Potential Damage: When a component has been installed in a machine and has been powered up in
normal user mode, it cannot be used in another machine; it must be returned to the manufacturer. The machine
must be powered up in Diagnostic mode or the controller board, control panel boards, or control panel will become
locked.
1
Remove the control panel front cover. See
2
Remove the control panel right bezel. See
3
Remove the four screws (A) securing the control panel board to the bezel.
4
Remove the control panel board.
"Control panel front cover removal" on page
"Control panel right bezel removal (MX71x)" on page
Repair information
495
7463
510.
515.