Lexmark MX71 Series Repair Manual page 404

Installation note: Make sure the cables don't get in the way of moving parts.
Sensor (stapler/stacker ejector HP) removal
1
Remove the stapler left cover. See
2
Remove the stapler right cover. See
3
Remove the stapler diverter plunger assembly. See
on page 760.
4
Remove the stapler drive gear assembly. See
5
Remove the stapler feed roll. See
6
Remove the stapler chute assembly. See
"Stapler/offset stacker left cover removal" on page
"Stapler right cover removal" on page
"Stapler/offset stacker diverter plunger assembly removal"
"Stapler/offset stacker drive gear assembly removal" on page
"Stapler/offset stacker feed roll removal" on page
"Stapler/offset stacker chute assembly removal" on page
Repair information
774
726.
782.
765.
767.
7463
761.