Lexmark MX71 Series Repair Manual page 372

5
Disconnect the cable (B) from the sensor, and then release the latches securing the sensor to the frame.
6
Pull the sensor off the frame and remove.
Sensor (left tamper motor HP) removal
1
Remove the stapler left cover. See
2
Remove the stapler right cover. See
3
Remove the stapler top cover. See
"Stapler/offset stacker left cover removal" on page
"Stapler right cover removal" on page
"Stapler/offset stacker top cover removal" on page
Repair information
742
726.
782.
728.
7463